View Single Post
Old 09-22-20, 03:25 AM   #7
SDMCF
Apprentice EcoRenovator
 
Join Date: Jul 2014
Location: Finland
Posts: 115
Thanks: 5
Thanked 31 Times in 30 Posts
Default

Jeff, how do you see such problems happening? I have no experience with drainback systems so I can only guess.

It seems to me there are 2 ways: a failure to pump fluid into the collectors because of pump or power failure, or collector temperature rising rapidly before the system can react and pump fluid. Have I missed something?

Failure to pump is a problem in any system, so not unique to tubes or drainback.

Slow reaction at first seems surprising, but thinking about it I can understand how this might happen. The temperature sensors on mine are at the (outlet) end of the manifold. Without fluid in the system to dampen the temperature rise the end of each tube could conceivably get very hot before the temperature rises is conducted as far as the temperature sensor. If I hold in my hand the end of a tube that is normally inserted into the manifold, with the tube in full sun the end quite quickly becomes too hot to handle.

I had not considered that before, so I was lucky that I did not (could not with my layout) opt for a drainback solution.
SDMCF is offline   Reply With Quote