EcoRenovator - View Single Post

Xringer · 10-16-09, 02:08 PM

Nope, it wasn't the right connector. Had one that I was able to kludge onto the HPA valve cap.

The regulator puts out about 850 psi, so I carefully charged up the new Refco manifold to 200 psi.
The low side reads 200 and the high side shows 210.. 5% accurate?
It's been hanging in there for half an hour, so there's no fast leaks anyways.

Edit:
Ebay had NYLOG GASKET THREAD SEALANT & ASSEMBLY LUBE RT201B
It's in route. Should be here by the middle of next week..

Edit: Oct 22, Nylog came in today. It's gooey

10-16-09, 02:08 PM	#44
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	The manifold just came in. Nope, it wasn't the right connector. Had one that I was able to kludge onto the HPA valve cap. The regulator puts out about 850 psi, so I carefully charged up the new Refco manifold to 200 psi. The low side reads 200 and the high side shows 210.. 5% accurate? It's been hanging in there for half an hour, so there's no fast leaks anyways. Edit: Ebay had NYLOG GASKET THREAD SEALANT & ASSEMBLY LUBE RT201B It's in route. Should be here by the middle of next week.. Edit: Oct 22, Nylog came in today. It's gooey Last edited by Xringer; 10-22-09 at 08:47 PM.. Reason: Nylog found on Ebay, isn't that reason enough?