View Single Post
Old 11-19-10, 04:09 PM   #4
strider3700
Master EcoRenovator
 
Join Date: Dec 2008
Location: Vancouver Island BC
Posts: 745
Thanks: 23
Thanked 37 Times in 30 Posts
Default

after reading this I decided to do a quick test on mine.

the metal furnace duct beside the tank was 18.9 (roughly basement temp)

The top of the side of the tank was 23.6

The top of the tank was 25.6

The nipple of the cold inlet and the hot outlet was 36 degrees

the hot outlet 3 feet up where it goes into the roof was 24.1

The hot water pipe roughly 8 feet down the line was 19 so basically back to basement temps.

When I replace/relocate the tank I will definitely be adding heat traps, insulating the tank and insulating as much of the pipe as I can get to.
strider3700 is offline   Reply With Quote