EcoRenovator - View Single Post - Remodeling the office (new floor, ceiling & adding insulation) passive house retrofit

MetroMPG · 04-22-14, 09:30 AM

We put click flooring in. Very easy to work with. Very convincing appearance, too.

There was a problem with the older stuff as it was a press-board type of core, so if you have a spill, you must wipe it up immediately in case it gets in the cracks and causes swelling of the material.

A friend of mine had to re-do a chunk of his kitchen floor after his water cooler sprung a leak and caused the flooring to get all swollen/lumpy along the seams.

There is also high-traffic, spill-resistant (vinyl), commercial grade stuff available.

04-22-14, 09:30 AM	#224
MetroMPG Infrequent noob Join Date: Aug 2008 Location: 1000 Islands region, Ontario, Canada Posts: 402 Thanks: 37 Thanked 20 Times in 19 Posts	We put click flooring in. Very easy to work with. Very convincing appearance, too. There was a problem with the older stuff as it was a press-board type of core, so if you have a spill, you must wipe it up immediately in case it gets in the cracks and causes swelling of the material. A friend of mine had to re-do a chunk of his kitchen floor after his water cooler sprung a leak and caused the flooring to get all swollen/lumpy along the seams. There is also high-traffic, spill-resistant (vinyl), commercial grade stuff available. __________________ . To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.