where2, I wrote you back a detailed PM but it was discarded when I sent it as I have too few posts. Drat!
Mikesolar, yes I have drooled reading about Viessmann boilers. I have installed HTP, Triangle tube Solo 60 that's in my current house, & Weil-McLain for buddy.
NiHoeMike, thanks for info
This is sourced from the solar tank.
"From 80* down to 35* I plan to source this to the heatpump evaporator. The destination from the condenser is the 120 gallon DHW / buffer tank."
I want to keep the 120 gallon DHW / buffer tank in the 120-145* range.
So it sounds like I need a R410a compressor?
Surplus City has this one:
2-1/2 TON AC/HP SCROLL COMPRESSOR, VOLT:208/230, HERTZ:60, PHASE:1, LRA:96.7, CAPACITOR:45 X 370(NOT INCLUDED), REFRIGERANT:R-410A, CONNECTION SIZE:1/2" X 3/4" SWEAT, HEIGHT:16", BASE DIMS:7-1/2" X 7-1/2", WEIGHT:68 LBS, ORIGIN:USA
SCL # : 171294
MFG : DANFOSS
MFG # : HRH031U1LP6
would this be a good choice & is the voltage correct for 240VAC ?
BBP
|