EcoRenovator - View Single Post - How to properly seal the exterior of your house with rigid foam?

Daox · 10-20-12, 07:42 AM

Well, this is what I have to work with. I removed the siding off the wall that I'll be working on. Some of the seams are taped with a dull grey tape that seems to still be holding well, some are taped with duct tape (some of which is falling off), and other seams are not taped at all.

Suggestions?

This gap is at least 1/4". I can see the boards behind the foam.

On the right side here you can see the dull grey tape I mentioned above. It still appears stuck quite well.

10-20-12, 07:42 AM	#3
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	Well, this is what I have to work with. I removed the siding off the wall that I'll be working on. Some of the seams are taped with a dull grey tape that seems to still be holding well, some are taped with duct tape (some of which is falling off), and other seams are not taped at all. Suggestions? This gap is at least 1/4". I can see the boards behind the foam. On the right side here you can see the dull grey tape I mentioned above. It still appears stuck quite well. Attached Images __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.