The other one was right handed so I am sure this one is also. This one is just so tight. I will get out my flare nut wrench tomorrow. I used two wrenches and it would not budge. I used a socket and a wrench it would not move.
I think I will have to heat this one to get it off.
The small one came off with the normal amount of pressure.
I just got two oversized patio blocks. I was planning on drilling holed through it and bolting the unit to them.
Yes I am using a premade flare nut line set.
I put some PB Blaster on it and I will let it sit overnight. Maybe I will have better luck in the morning.
Last edited by pinballlooking; 10-20-13 at 06:27 PM..
|