View Single Post
Old 10-25-20, 01:23 PM   #7
Sadashi
Lurking Renovator
 
Join Date: Jan 2020
Location: Romania
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts
Default Indoor sensor .

If you have underfloor heating , then you can put the indoor air sensor on the return flow pipe and set your indoor temperature to 30°C from the remote control , this way if delta T is 5°C between supply and return , then you should have 35°C on the flow pipe . I have only one thermistor on the brazzed plate heat exchanger .
Sadashi is offline   Reply With Quote