EcoRenovator - View Single Post

randen · 09-24-13, 07:04 PM

Fellow Eco-renovators

Look at the crate that showed up. Three nice sized new Brazed plate heat exchangers. Two will be to rebuild the 5 Ton heat-pump. I had found the tube and shell HX that I built was marginal in capacity so purchased some more appropriate BPHX. The HX were built to order with the proper brazed connections on the refrigerant side. and pipe thread on the loop side.

The third BPHX is going to be used for the house solar hot water. I'll post the activities on this install in another post

Looking forward To having the 3ph control for the compressor. And hopefully some really good COP.

Randen

09-24-13, 07:04 PM	#30
randen Uber EcoRenovator Join Date: Apr 2011 Location: Strathroy Ontario Canada Posts: 657 Thanks: 9 Thanked 191 Times in 129 Posts	Rebuilding the 5 Ton Fellow Eco-renovators Look at the crate that showed up. Three nice sized new Brazed plate heat exchangers. Two will be to rebuild the 5 Ton heat-pump. I had found the tube and shell HX that I built was marginal in capacity so purchased some more appropriate BPHX. The HX were built to order with the proper brazed connections on the refrigerant side. and pipe thread on the loop side. The third BPHX is going to be used for the house solar hot water. I'll post the activities on this install in another post Looking forward To having the 3ph control for the compressor. And hopefully some really good COP. Randen Attached Images