EcoRenovator - View Single Post - IBC tote tanks in series as low cost HP source

buffalobillpatrick · 10-03-14, 10:24 AM

Jeff5may, thanks for that paper.
The 2nd paragraph in Conclusions sums it up:
Slightly better storage with parallel, but very difficult to balance. (Could be specific to this test setup)

Mikes polar thx. For insight. The El-Sid pump could not be used to provide flow for HP, I was thinking of low power slow circulation 24/7/365

Hehe got to love spell correction

HDPE is good enough for any temp. That system would provide.

10-03-14, 10:24 AM	#13
buffalobillpatrick Master EcoRenovator Join Date: Mar 2014 Location: Florissant, Colorado Posts: 599 Thanks: 814 Thanked 59 Times in 55 Posts	Jeff5may, thanks for that paper. The 2nd paragraph in Conclusions sums it up: Slightly better storage with parallel, but very difficult to balance. (Could be specific to this test setup) Mikes polar thx. For insight. The El-Sid pump could not be used to provide flow for HP, I was thinking of low power slow circulation 24/7/365 Hehe got to love spell correction HDPE is good enough for any temp. That system would provide. Last edited by buffalobillpatrick; 10-03-14 at 11:33 AM..