I have been using it more than I thought I would. It is just fun to ride and I enjoy riding a lot more than I thought I would.
I soldered two pieces of copper across the mosfets. I am not really sure how much that will help but people that did the mod claimed it helps.
I went over a bunch of the solder joints and added a small amount of solder. I do believe this will help as some of the joints looked very questionable.
I added a resistor in parallel this should increase the current flow AMPS. (Shunt Mod)
I had to order an adapter for my measuring device. I need to find out the amp draw now then install the moded controller and measure the amp draw to know how much I increased it.