EcoRenovator - View Single Post

Vlad · 08-14-12, 06:59 PM

opiesche,

Be careful when you select your HWT. All HWT have their minimum temperature unless it is a condensing one. If you just get regular DHWT and try to run it @ 80F you will end up with condensation problem.

For this reason if you use regular DHWT (non condensing type) you have to keep it @ minimum allowed temperature an install mixing valve.

I used special mixing valve I050C2R-2 - Taco I050C2R-2 - 1/2", 2 Way Outdoor Reset I-Series Mixing Valve w/ Sensor which works as thermostat as well. It is pricey but worth every penny. Check eBay for better deal but make sure you get exactly this model.

08-14-12, 06:59 PM	#11
Vlad Apprentice EcoRenovator Join Date: Aug 2010 Location: Windsor ON Canada Posts: 229 Thanks: 4 Thanked 30 Times in 22 Posts	opiesche, Be careful when you select your HWT. All HWT have their minimum temperature unless it is a condensing one. If you just get regular DHWT and try to run it @ 80F you will end up with condensation problem. For this reason if you use regular DHWT (non condensing type) you have to keep it @ minimum allowed temperature an install mixing valve. I used special mixing valve I050C2R-2 - Taco I050C2R-2 - 1/2", 2 Way Outdoor Reset I-Series Mixing Valve w/ Sensor which works as thermostat as well. It is pricey but worth every penny. Check eBay for better deal but make sure you get exactly this model.