EcoRenovator - View Single Post - Harbor Freight sandblast cabinet heavily modify.

pinballlooking · 03-23-20, 03:23 PM

Thanks.
I had one step that I did not get good powder coat coverage. I was able to sand blast it off pretty easily.
You only have to use about two or three cups of media

My shop vac is back and running the winding that was broken was never soldered at the factory. It is strange the other side was soldered.
It needed a good cleaning.

03-23-20, 03:23 PM	#5
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	Thanks. I had one step that I did not get good powder coat coverage. I was able to sand blast it off pretty easily. You only have to use about two or three cups of media My shop vac is back and running the winding that was broken was never soldered at the factory. It is strange the other side was soldered. It needed a good cleaning. __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Last edited by pinballlooking; 03-23-20 at 09:26 PM..