View Single Post
Old 01-28-16, 07:22 AM   #25
Fordguy64
Journeyman EcoRenovator
 
Join Date: Oct 2011
Location: Cincinnati ohio
Posts: 338
Thanks: 40
Thanked 35 Times in 31 Posts
Default

So progress has been slow lately. It's just been to cold out side (no heat in garage) but I haven't been pleased with the heat output of this thing yet. Few problems I've had are the nozzle will still clog up once in a while and that might be my fault as I'm not super careful with the filtered oil. Problem two I've greatly under estamated 30k btu lol it takes much longer to heat things up than I thought even tho my chimney temps are in the low 100*f range. So I have been re thinking the heat exchanger and also pondering doubling the nozzle size to a 60k version. The larger size doesn't require any more air pressure and only slightly more cfm. So my hope is that the larger nozzle will have larger openings so it won't clog up.
Fordguy64 is offline   Reply With Quote