It seems that a radiant cooling wall/ceiling system would work with best with a thermostat for each area or room, just like a radiant floor system.
Install a large emitter surface in each area for heating & cooling. I like low power use Taco zone valves & Grundfos Alpha ECM pump.
Use my DIY 2.7 Ton water-to-water heat pump.
Rent a large Ditch Witch & install 2 runs of 1" PE pipe about 4' & 6' deep, & long enough to handle 3 tons of heating/cooling in 78*F wet sandy soil.
Last edited by buffalobillpatrick; 01-26-15 at 05:19 PM..
|