EcoRenovator - View Single Post

Xringer · 09-16-16, 01:37 PM

The replacement ODU got to the Boston depot last night at 11PM..
It will be delivered on Saturday morning! Before noon.

Today, I did a little thinking about the weight of the Gree Crown ODU..
I didn't really like that extra weight on those little plastic stands.
The right side has most of the weight on it. (compressor side).
I think that side was flexing slightly. It seemed over-loaded.
So, I found an old 4x4 and sawed up a pair of new base stands..

Once I find the optimal location on the 4x4s, I will bolt the ODU down, using the rubber feet..
Just like I did with the Den Sanyo install..

Speaking of the Den Sanyo.. We had to take out the chill this morning!

09-16-16, 01:37 PM	#52
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	45.7°F this morning!! The replacement ODU got to the Boston depot last night at 11PM.. It will be delivered on Saturday morning! Before noon. Today, I did a little thinking about the weight of the Gree Crown ODU.. I didn't really like that extra weight on those little plastic stands. The right side has most of the weight on it. (compressor side). I think that side was flexing slightly. It seemed over-loaded. So, I found an old 4x4 and sawed up a pair of new base stands.. Once I find the optimal location on the 4x4s, I will bolt the ODU down, using the rubber feet.. Just like I did with the Den Sanyo install.. Speaking of the Den Sanyo.. We had to take out the chill this morning! Attached Images __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..