EcoRenovator - View Single Post

stevehull · 03-28-16, 08:06 PM

Before you go to all this trouble, PLEASE verify your waste water heat value. You claim it is between 80 and 90 F.

Waste water recovery works best when the water inlet temp is cold, preferably below 45 F. I believe your water inlet temp is about 65 F.

Do not get the peak temp of waste water, get a 24 hour average. Not hard to do. THEN, design the heat recovery system.

Steve

03-28-16, 08:06 PM	#13
stevehull Steve Hull Join Date: Dec 2012 Location: hilly, tree covered Arcadia, OK USA Posts: 826 Thanks: 241 Thanked 165 Times in 123 Posts	Before you go to all this trouble, PLEASE verify your waste water heat value. You claim it is between 80 and 90 F. Waste water recovery works best when the water inlet temp is cold, preferably below 45 F. I believe your water inlet temp is about 65 F. Do not get the peak temp of waste water, get a 24 hour average. Not hard to do. THEN, design the heat recovery system. Steve __________________ consulting on geothermal heating/cooling & rational energy use since 1990