EcoRenovator - View Single Post - Solar Back-Up power project

Xringer · 02-07-21, 06:19 PM

I was wondering about my PWM charger and found this paper..
https://www.morningstarcorp.com/wp-c....-Why-PWM1.pdf

It seems like I should have been 'periodically' putting a load on the system. Eat up some Ah at night, and let it charge up the next morning. That might keep the cells in tip-top shape. If I buy the same old lead-acid batts..

Looking at this 48v pack. https://bigbattery.com/products/48v-...on-power-pack/
It might be chargeable with the TS-45 if I turn off the PWM and tweak the charge & float voltages.

02-07-21, 06:19 PM	#31
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	48V 1.6kWh Li-ion Power Pack?? I was wondering about my PWM charger and found this paper.. https://www.morningstarcorp.com/wp-c....-Why-PWM1.pdf It seems like I should have been 'periodically' putting a load on the system. Eat up some Ah at night, and let it charge up the next morning. That might keep the cells in tip-top shape. If I buy the same old lead-acid batts.. Looking at this 48v pack. https://bigbattery.com/products/48v-...on-power-pack/ It might be chargeable with the TS-45 if I turn off the PWM and tweak the charge & float voltages. __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..