List of tools I bought for the install and review of the two systems are here.
http://ecorenovator.org/forum/geothe...nstall-12.html
Mini Split install (this is my first mini split install)
I made some progress.
Bracket installed.
I measured a few times and made sure it mounted on two 2x4's. Then I made sure the 3” hole was free from everything but drywall.
Inside unit installed.
It did this by myself and it is fun getting it through the hole with 2 ft copper pipe sticking out.
I stood on my night stand and almost fell off when putting it on the wall.
Line set cover installed.
I put silver line set tape on the screws just to keep sharp edges away from the line set.
Inside unit wired.
