Parts list.
-2x 1/4 service valves
-30ish feet of 1/4 tubing
-A cut in half evap out of a 5,000 btu window unit
-A fan from a old fridge
-A suction line accumulator out of a water cooler (not needed)
-LG NSA 30LACG R134a compressor
-8 inches of tiny tiny cap tube
-Timer
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
-Thermostat
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
-10 port bus bar
-Random lengths of Red and Black 14 gauge stranded wire
-A small switch
-A 120V 16 gauge 3 prong pigtail
-5 trays from a old dehydrator
-Random rigid foam pieces to box in the fan/compressor/evap
-Plexiglass for door and back viewing port
-Some door weather strip
-A window lock like this one for the door handle/lock
Prime-Line Products F 2588 Window Sash Lock with Keeper, Cam Action, White Finish - Window Latches - Amazon.com
-3/4" pine plywood to box it all in
-White paint
I can set the timer to 3 hours and the temp to 125F and it has dried everything I've thrown at it.