View Single Post
Old 08-01-12, 03:42 PM   #15
Journeyman EcoRenovator
Join Date: Oct 2011
Location: Cincinnati ohio
Posts: 334
Thanks: 33
Thanked 34 Times in 31 Posts

So IM going to bring this one back from the grave.. Could you take 1"copper and run 1/2 copper through it with reducers on the end of the one inch to go to the 1/2. Then solder on a quick connect like one for hvac and pull the vac on the outside pipe( between the 1 and 1/2 pipe) if that makes sense??
Fordguy64 is offline   Reply With Quote