View Single Post
Old 10-12-09, 05:27 PM   #1
Lurking Renovator
Join Date: Sep 2008
Location: Savannah, Georgia
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
Default E15 Elec-trak restoration

Yes!!! Been a while since I posted, but I had to brag on this...

Took my restored E15 Elec-Trak for its first drive, today! Took a couple laps around the back yard before parking it in the trailer. I couldn't believe how little current it used. D1 only used 20-30 amps at max. throttle depending on terrain, and D2 only used 30-40. Now kicking in the field weakening really caused a surge (up to 100 amps) briefly, and a HUGE surge in speed! Good thing it is a smooth adjustable resistance. I don't think I'll be using it that much - D2 at full throttle is just fine (about the same as 4th gear on my old Dynamark)!

Don't know how much total energy it will use, I bet it takes more than 2.5 cents per mow, but it still WAY better than the old ICE mower.

I was impressed that it stopped well even without using the brake, and maintained a nice steady speed even going downhill. It behaves a lot like the ICE tractor did in this manner.

Now I have the space in the garage to work on the caster arrangments for the deck, which is all that is left to do before I can mow...WITHOUT hearing protection! The biggest adjustment is going to be the front mounted deck. When I sat on the tractor it finally hit home how much bigger this is than the old ICE mower. To top it off, the deck will be about 6 feet in front of me.

I put together an online restoration diary to document all this, since it might help somebody. The address is: home page.htm

It isn't linked from my main EV page or home page yet, so if you go there, you have to use the back button to get back to it. And it isn't complete, but it is done up to installation of the hood, and that was only a week ago. I'll get the rest up in a few days.

(...and this time it is in regular HTML format )

Last edited by Daox; 10-12-09 at 05:56 PM..
davidbr13 is offline   Reply With Quote