The actual schematic will be classified semi-secret, unit I figure it out..
I just heard the news. I
won a pure-sine-wave inverter on Ebay..
I was thinking maybe I'll need to use the 500w tracking array, since it has
higher output voltage. Which might be needed for the 48 volt batt.
The little sine-wave inverter will use one battery and the PowerJack GTI
will be connected up for 36 or 48 volts, what ever works better.
When I test the theory, I'll just use one 200w CS6P-200 panel on the GTI.
Edit:
I wonder if the DPDevil1 off-grid method would work for those folks who have
20 panels and 20 Enphase inverters on their roof, but can't get a watt out of it,
if the grid goes down on a hot day.?.
What if the black-out went on for a few days??
(In 2009, some people around here, lost the grid for a month).
I wonder if they would do something illegal?
1. like opening their main breaker
2. opening ALL their breakers
3. connecting the output of a 220 generator or 12v to 220 inverter to a 220 outlet?
4. and then close a few breakers, where they needed some back-up juice?
If those Enphase units woke up, that could be pretty sweet..