View Single Post
Old 02-19-24, 03:04 PM   #1
woody
Lurking Renovator
 
woody's Avatar
 
Join Date: Jan 2014
Location: Cave Junction, OR
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Default heatpump water heater question

Hi, I've been using one of these inline with my standard water heater for 9 yrs. and it has worked wonderfully. It recently developed a leak internally and had to shut it down. It was made by Nyle systems and is called a Geyser-R.

They don't make them anymore and was wondering if any of you folks know of a product similar to this? Thanks a lot, Woody

__________________
----------------------------------------------
Cave Junction, OR 97523
so I got my numbers at:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


I used a balance point of 65 degrees.

So 2012 was:
HDD@65=5552
CDD@65=190
TDD@65=5742

And 2013 was:
HDD@65=5982
CDD@65=271
TDD@65=6253
550/600sq. ft. Should be about 12000 BTU

Doing research on a 12,000 btu ductless split air system
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

----------------------------------------------

Last edited by woody; 02-19-24 at 03:08 PM.. Reason: wrong word
woody is offline   Reply With Quote