Thread: Under Pressure
View Single Post
Old 01-22-13, 06:57 PM   #7
randen
Uber EcoRenovator
 
Join Date: Apr 2011
Location: Strathroy Ontario Canada
Posts: 657
Thanks: 9
Thanked 191 Times in 129 Posts
Default

Mike I pulled a little glycol/water mix out and checked it with my refractometer but the scale only goes to 15% so just a guess because it was off the scale 20-25%. As I had played with it I really couldn't notice any viscosity change. I left some out-side and opps, it became slush at -12 Deg C and became solution at -10 Deg C. Going to need some more Propylene Glycol. I'll just leave the circ. pump run.

My concentration is on the new compressor & of coarse the work thing. The delta T in and out of the HX is only a spread of 1-2 Deg C. I don't think flow is the problem. Just the installer didn't assure all the air was removed.

Still Burrr
Randen
randen is offline   Reply With Quote