EcoRenovator - View Single Post - Got a free snowblower

Daox · 01-31-20, 08:59 AM

I pulled the trans out to take a look at it on the off chance that they used a standard gear I could get off the shelf. After looking at it, I highly doubt it.

It is an interesting design though. The bent metal plate moves back and forth and when the clutch is engaged it pinches the brass gear between the bearings. There is no friction material to wear out.

A little brass in the oil?

01-31-20, 08:59 AM	#21
Daox Administrator Join Date: Aug 2008 Location: Germantown, WI Posts: 5,525 Thanks: 1,162 Thanked 374 Times in 305 Posts	I pulled the trans out to take a look at it on the off chance that they used a standard gear I could get off the shelf. After looking at it, I highly doubt it. It is an interesting design though. The bent metal plate moves back and forth and when the clutch is engaged it pinches the brass gear between the bearings. There is no friction material to wear out. A little brass in the oil? Attached Images __________________ Current project - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. & To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.