EcoRenovator - View Single Post

mechanic · 08-09-15, 08:51 AM

Decided to take a crack at this food drying thing since the garden is getting ripe... Took an old fridge and disconnected everything but the fan and the light. Then I sealed everything in the freezer with caulk so the fan would suck from the fridge better. Next I cut a hole below the crisper and mounted the evaporator and a drip pan. I drilled a bunch of holes in the crisper plate for condenser airflow and mounted the compressor and condenser on there and she was ready for a test run!

08-09-15, 08:51 AM	#1
mechanic Apprentice EcoRenovator Join Date: Aug 2014 Location: Saskatchewan, Canada Posts: 117 Thanks: 10 Thanked 16 Times in 12 Posts	Another heat pump food dryer Decided to take a crack at this food drying thing since the garden is getting ripe... Took an old fridge and disconnected everything but the fan and the light. Then I sealed everything in the freezer with caulk so the fan would suck from the fridge better. Next I cut a hole below the crisper and mounted the evaporator and a drip pan. I drilled a bunch of holes in the crisper plate for condenser airflow and mounted the compressor and condenser on there and she was ready for a test run!