Ran a overnight test using the auto temp control it maintained a house temp of 19c consuming a average of 470 watts per hour or just less then half its 1050w draw.
a 45% duty cycle , outside temp 6 to 7c / 44f
So I will be cutting the vent back in the kitchen floor to vent warm air with a Air king 200cfm 1.4 sone fan mounted in the downstairs rooms ceiling.
Right now a box fanis in the downstairs doorway to cycle air in and out , it works.
Its pushing out the heat with vent temps high is 125 to 130F with a low of 115*F at 40 to 44f.
Before the next few days are up will make a air filter box with vents to secure the hose ends.
Thinking will use a can or two of spray foam to insulate the vent with.
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|