View Single Post
Old 10-26-13, 03:11 PM   #11
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default Hi Guys!

Thanks, I'm going to change the system off time to 10PM!!
And we shall see what happens..

~~

I agree about pumping in some not-so-warm air.
If it's warmer than my basement, it's welcome.
I might just program the set-point for basement temp+5 deg F.

My wife and I have already noticed it's nicer in the basement today.
We can feel the difference. The log shows a 4 deg F gain,
but a lot of that is due to heat leakage from the hotwater tank(PV gain) and my wife ran the dryer..
Bad data day again! One of these days, we'll get a solid solar day!


The air the I'm pumping outdoors, is coming right off the floor (cold concrete slab)
and is slightly contaminated with a heavy gas called Radon..
So, recycling it isn't the cards.. I'm pretty sure that a really good filter
would be needed to clean it up.

Got a little bug in my logging for some reason..

Here's the plot for the day..

Got some hot water in the tank and a little hot air in the basement..

Attached Images
 
__________________
My hobby is installing & trying to repair mini-splits
EPA 608 Type 1 Technician Certification ~ 5 lbs or less..

Last edited by Xringer; 10-26-13 at 05:59 PM..
Xringer is offline   Reply With Quote