Fall weather is starting to settle in to Ontario Canada. Wind rain, cold , soon it will be too in-climate for this Canuck to work out side!! Today was a good day and much progress had been made. The wall had all the insulation tucked back in and windows squared and shimmed. The custom stainless drip flashings had been fastened. As well the poly-iso that was previously painted a flat black is fastened into place. The paint will need to be touched up here and there but it all went on real well. I need to change some of the old ratty fiberglass insulation at the extreme ends and trim additional poly-iso board to fit. All the Suntuf acrylic sheet stock had been ordered and should be here in a few days.
The really fun stuff is about to begin. THE COPPER stuff. And that's going to be a lot of copper. Making the copper tube risers and fins about to start. The exterior can now take some rain therefore one can begin to cut & form copper on the bad days and only install on the good days. OOh can almost feel that free heat already!!
Randen
