EcoRenovator - View Single Post

Solar Mike · 07-14-14, 07:52 PM

I would connect a relay with its coil supplied by the Output port, and use that to switch power direct from the battery to your gate motor. Place spike suppressor diode (IN4007 or similar) across the relay coil and motor coils. There is no reason to spend more for a bigger replacement.

Cheers
Mike (NZ)

07-14-14, 07:52 PM	#2
Solar Mike Helper EcoRenovator Join Date: Apr 2010 Location: Wellington, New Zealand Posts: 61 Thanks: 0 Thanked 6 Times in 5 Posts	I would connect a relay with its coil supplied by the Output port, and use that to switch power direct from the battery to your gate motor. Place spike suppressor diode (IN4007 or similar) across the relay coil and motor coils. There is no reason to spend more for a bigger replacement. Cheers Mike (NZ)