EcoRenovator - View Single Post - Recycling old (2009) Electric 'push' Lawn mower

Xringer · 08-31-12, 05:54 PM

It is in pretty good shape. The cut-height adjustment handle (above right rear wheel)
is the smoothest working height tweaker I've every seen on any mower.

I'm waiting for a little plastic part. It holds the blade to the motor shaft, but has ridges
on it's sides that are meant to break off, if the blade hits a solid object.
(That would normally break the blade or motor shaft).

08-31-12, 05:54 PM	#5
Xringer Lex Parsimoniae Join Date: Feb 2009 Location: Woburn, MA Posts: 4,918 Thanks: 114 Thanked 250 Times in 230 Posts	It is in pretty good shape. The cut-height adjustment handle (above right rear wheel) is the smoothest working height tweaker I've every seen on any mower. I'm waiting for a little plastic part. It holds the blade to the motor shaft, but has ridges on it's sides that are meant to break off, if the blade hits a solid object. (That would normally break the blade or motor shaft). __________________ My hobby is installing & trying to repair mini-splits EPA 608 Type 1 Technician Certification ~ 5 lbs or less..