Quote:
Originally Posted by nokiasixteth
I was under the impression being it was 350 volts of dc it may have a little less drop . It would be less of a voltage drop to the house than 240 volts ac . But also seem to remember tesla and edison ac being more efficient to transfer . I figured i would throw that out by someone who is smarter than i am. . Am going to use 8 guage wire from the shop to the house though . Measured today . From the shop where i was going to mount inverter on shop is 112ft. give or take a couple inches for disconnect box.
|
How many amps are you going to be running through that wire? Have you looked distant and amp charts?
You need to be careful about voltage rise. The inverter will increase the voltage to feed it back to the grid. If you have too much voltage rise from using wire not suited for that distance it will just shut down the inverter.
Here this explains some on voltage drop and why it is important
http://www.affordable-solar.com/epis...ing-for-solar/
Wire sizing
http://www.affordable-solar.com/wire...and-resources/
__________________
Current project Aquaponics system , Passive Solar Greenhouse build
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|