I have tried inductors. The inductors that I could get ahold of didn't preform as well as the resistors I could get.
I used micro wave over transformers that had their secondary windings removed.
The resistor allowed the current to slowly build up amps, the inductors I tried still allowed inrush and a large spike in starting amps.
If the inductor had too much reactance it would start the motor slower but the amps would surge as high if not higher than just putting full power to the motor. If I used less reactance the motor would start faster, not draw as many amps but would still surge pretty hard.
I may parallel a capacitor in with the motor during startup because I have observed lower power factor during starting and running unloaded. It may save 2 to 3 amps during starting.
|