AC
Memphis had measured the bore hole at 65.5 Deg. F and a suction temp. at the compressor at 65.5 Deg. F That is all excellent!!!!His suction pressure of 27psi is very close. I believe he needs to have some good data for 24 hrs with the temperature sensor in the bottom of the tank set at about 110-120 and see what the kill-o-watt will tell as the system holds the temp there.
Graph the information for a week adjusting very little to find a sweet spot holding a temp for the least amount energy, because this is how it will be operating in the real world.
Randen
|