EcoRenovator - View Single Post - Warm-air furnace, reducing excess capacity

Indyplumber · 01-12-12, 03:02 PM

It may have a rubber gasket on it. You might be able to get some hi-temp gasket material and cut a new one if the old one breaks. While you are at it, check the fan blades on the blower motor too. It should be fairly easy to pull out and check. With your filter being clogged the way it was, the inducer and blower fan blades being clogged is the most likely culprit.

01-12-12, 03:02 PM	#23
Indyplumber Lurking Renovator Join Date: Jan 2011 Location: Indiana Posts: 18 Thanks: 3 Thanked 1 Time in 1 Post	Check the fan blades It may have a rubber gasket on it. You might be able to get some hi-temp gasket material and cut a new one if the old one breaks. While you are at it, check the fan blades on the blower motor too. It should be fairly easy to pull out and check. With your filter being clogged the way it was, the inducer and blower fan blades being clogged is the most likely culprit.