EcoRenovator  

Go Back   EcoRenovator > Search Forums
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts


Showing results 1 to 25 of 35
Search took 0.00 seconds.
Search: Posts Made By: jeff5may
Forum: Geothermal & Heat Pumps 06-03-14, 07:26 PM
Replies: 293
Views: 108,505
Posted By jeff5may
Since you have a straight shot through of...

Since you have a straight shot through of turbulent flow, orientation is not as critical as with plate hx's. If you have a certain limitation with space, the coax hx will do OK either way.

That...
Forum: Geothermal & Heat Pumps 03-26-14, 03:51 AM
Replies: 293
Views: 108,505
Posted By jeff5may
Straight from emerson: ...

Straight from emerson:
http://www.emersonclimate.com/Documents/FlowControls/pdf/txv/catalog/TLE_Series.pdf

I like the supco hard start kits myself. They use a potential relay to switch the start...
Forum: Geothermal & Heat Pumps 03-25-14, 04:57 PM
Replies: 293
Views: 108,505
Posted By jeff5may
Don't choke your pot. It may be adjustable...

Don't choke your pot.

It may be adjustable on the inside. Check the mfr part # to find out.
I could check for you, but you focused on the brick instead of the valve in your pic. Too blurry to...
Forum: Geothermal & Heat Pumps 03-25-14, 03:30 AM
Replies: 293
Views: 108,505
Posted By jeff5may
It goes along with the goal of hotter water and...

It goes along with the goal of hotter water and how to control condensing temperature. Slow the flow, man...

By the way,...
Forum: Geothermal & Heat Pumps 03-24-14, 06:34 PM
Replies: 293
Views: 108,505
Posted By jeff5may
Correct, thus the hyper-heat reference. For...

Correct, thus the hyper-heat reference.

For those of you who don't know, hyper-heat is Mitsubishi's new trademark name for its new cold weather heating gimmick. When you push the hyper-heat...
Forum: Geothermal & Heat Pumps 03-24-14, 04:09 AM
Replies: 293
Views: 108,505
Posted By jeff5may
IMHO, adding intentional superheat or subcooling...

IMHO, adding intentional superheat or subcooling to the equation is

1. Playing with danger
2. Not very effective (SENSIBLE HEAT TRANSFER)
3. Too easy

That is , if your compressor and heat...
Forum: Geothermal & Heat Pumps 03-23-14, 07:03 PM
Replies: 293
Views: 108,505
Posted By jeff5may
Probably with your system, the best way to get...

Probably with your system, the best way to get HOT HOT water out of it constantly is to monitor condenser outlet temperature vs condenser inlet temperature. To get maximum heat transfer and to get...
Forum: Geothermal & Heat Pumps 03-23-14, 05:18 PM
Replies: 293
Views: 108,505
Posted By jeff5may
That looks like something more my size! If you...

That looks like something more my size!
If you don't mind telling, where'd it come from? Can I get one? How much is dat?

I could possibly use one that size in a 5000 btu air conditioner or...
Forum: Geothermal & Heat Pumps 03-22-14, 04:09 AM
Replies: 293
Views: 108,505
Posted By jeff5may
5. Maximize heat transfer vs power input at a...

5. Maximize heat transfer vs power input at a single temperature split or within a range. Minimize subcooling to the point where there are no bubbles making it to the txv. Superheat will remain...
Forum: Geothermal & Heat Pumps 03-21-14, 02:58 PM
Replies: 293
Views: 108,505
Posted By jeff5may
I intentionally left the end of the story short...

I intentionally left the end of the story short and sweet. There is so much controversy as to how much of what to end with; it really depends on the individual system. The main ideas are:

If...
Forum: Geothermal & Heat Pumps 03-21-14, 04:12 AM
Replies: 293
Views: 108,505
Posted By jeff5may
OK, check this out: If you apply pressure to...

OK, check this out:

If you apply pressure to the low side, gas will flow through the compressor. When pressures equalize, the flow will stop.

If you apply vacuum to the high side, gas will flow...
Forum: Geothermal & Heat Pumps 03-20-14, 09:15 PM
Replies: 293
Views: 108,505
Posted By jeff5may
For ultimate speed in vacuuming, buy this kit: ...

For ultimate speed in vacuuming, buy this kit:
http://www.climatedoctors.com/core/media/media.nl?id=3706&c=739234&h=974ffa0845a2ea314c4a&resizeid=-2&resizeh=240&resizew=240
Yellow Jacket 93866...
Forum: Geothermal & Heat Pumps 03-20-14, 09:07 PM
Replies: 293
Views: 108,505
Posted By jeff5may
Nononononono... the Zohan says do both sides at...

Nononononono... the Zohan says do both sides at once.

With rig like you say (with super duper hose hooker):

1. Purge newly built system by charging slowly from nitro cylinder on low side...
Forum: Geothermal & Heat Pumps 03-20-14, 07:48 PM
Replies: 293
Views: 108,505
Posted By jeff5may
Trust me, you'll be glad you have that hose the...

Trust me, you'll be glad you have that hose the first time you need it. I wish I had 8. And more flare tees to go with them. Caps, 1/4" copper tubing and flare nuts can only get you so far. Sooner or...
Forum: Geothermal & Heat Pumps 03-20-14, 07:03 PM
Replies: 293
Views: 108,505
Posted By jeff5may
This is how to rig the micron gauge to the vacuum...

This is how to rig the micron gauge to the vacuum pump:

http://www.achrnews.com/NEWS/2004/44/Files/Images/115041.jpg

without a manifold gauge set, ultra super pro combo rough duty 1 gauge:...
Forum: Geothermal & Heat Pumps 03-19-14, 05:59 PM
Replies: 293
Views: 108,505
Posted By jeff5may
More like engineers and corporate buyers. To get...

More like engineers and corporate buyers. To get in single quantity, it may be practically priceless. Or go to supply house and custom order (MSRP + Ship + Handle + drive to store), pay up front of...
Forum: Geothermal & Heat Pumps 03-19-14, 03:57 AM
Replies: 293
Views: 108,505
Posted By jeff5may
I went down the same road as you are on now. The...

I went down the same road as you are on now. The water is murky in this realm, to say the least. Since you are building a water source, water sink heat pump, you will be able to directly measure your...
Forum: Geothermal & Heat Pumps 03-17-14, 09:10 PM
Replies: 293
Views: 108,505
Posted By jeff5may
BBP, The goal is to minimize superheat and...

BBP,

The goal is to minimize superheat and subcooling as low as we can, as it is not latent mode heat transfer to and from the refrigerant. A small amount of each is necessary (superheat to avoid...
Forum: Geothermal & Heat Pumps 03-16-14, 04:58 PM
Replies: 293
Views: 108,505
Posted By jeff5may
If they are the blue or orange coated rods they...

If they are the blue or orange coated rods they will be ok. You should still use the white flux on the parts.
Forum: Geothermal & Heat Pumps 03-16-14, 10:10 AM
Replies: 293
Views: 108,505
Posted By jeff5may
If you decide to have a pro do it, have them weld...

If you decide to have a pro do it, have them weld on some flare fittings. Then you will never have to worry about brazing anything.

Brazing for Dummies:

How to Braze Properly | Metal Brazing...
Forum: Geothermal & Heat Pumps 03-16-14, 08:50 AM
Replies: 293
Views: 108,505
Posted By jeff5may
stainless and copper are not real easy to braze...

stainless and copper are not real easy to braze together. the same properties that make it strong and corrosion resistant (tenacious self-healing oxide layer, complex metal alloying)complicate the...
Forum: Geothermal & Heat Pumps 03-15-14, 04:17 AM
Replies: 293
Views: 108,505
Posted By jeff5may
The ester oil is not as diluted by dissolved...

The ester oil is not as diluted by dissolved propane as mineral oil. Glycol oil is much less soluble than either of the other 2. The main concern is at low temp high mass flow operation. Propane as...
Forum: Geothermal & Heat Pumps 03-14-14, 08:22 PM
Replies: 293
Views: 108,505
Posted By jeff5may
Cripple Creek? I've been there a few times! My...

Cripple Creek? I've been there a few times! My parents took me on a weekend road trip and we stayed at an ancient hotel with banging steam lines. I didn't get much sleep that weekend at all.

I...
Forum: Geothermal & Heat Pumps 03-14-14, 08:11 PM
Replies: 293
Views: 108,505
Posted By jeff5may
We don't know where you got that model number of...

We don't know where you got that model number of oil, but CPI doesn't make 1507 oil in ISO 32 weight. They only make 68 and 100.

If you know you need PAG oil, you can get 46, 100, and 150 weight...
Forum: Geothermal & Heat Pumps 03-14-14, 07:27 PM
Replies: 293
Views: 108,505
Posted By jeff5may
not my fault.

not my fault.
Showing results 1 to 25 of 35

 
Forum Jump

All times are GMT -5. The time now is 12:26 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design