EcoRenovator

EcoRenovator (https://ecorenovator.org/forum/index.php)
-   Tools (https://ecorenovator.org/forum/forumdisplay.php?f=29)
-   -   Harbor Freight 30” 5 drawer tool cart. (https://ecorenovator.org/forum/showthread.php?t=6702)

pinballlooking 07-16-18 09:28 AM

Harbor Freight 30” 5 drawer tool cart.
 
1 Attachment(s)
My quest to get organized.

Price is $199.99 20% coupon can’t be used on it I found a coupon for $169 it you watch you can get a little better coupon.
The 4 drawer was on sale for $99 this was a good deal but I liked the 5 drawer better.

Let’s face it. It is a Snap On knock off for a fraction of the price. (both are made in China)
All ball bearing drawers it has a good feel to it very nice.
I wanted a blue one but I wanted a side shelf they only have red side shelfs so far so I bought a red one so the shelf would match.
This tool box gets great reviews.


https://www.youtube.com/watch?v=1swTDW8JQXU

https://ecorenovator.org/forum/attac...1&d=1531751214

Just a few more things to do before I start filling it up.
Now that I have a clear floor car lift I can roll this up and under the car.
That way tools will be close at hand.

natethebrown 07-17-18 10:21 AM

I am looking forward to buying my own Harbor Freight Tool Box, probably the 72" one. Considering the quality is nearly the exact same as the boxes from the big box stores (Lowes, Homedepot, etc) and is cheaper, seems like a good deal to me. The only way to get a higher quality box (MAC, Snap-on) is to refinance the house, seems like a no brainer.

pinballlooking 07-17-18 10:27 PM

2 Attachment(s)
I have the tool box put together. I bought some magnetic tool holders to rivet to the top lid.

My 24" breaker bar fits right down through the top on the right side very nice.
https://ecorenovator.org/forum/attac...1&d=1531884379

https://ecorenovator.org/forum/attac...1&d=1531884379

I have three other craftsman ball bearing boxes this box is on par with those. This one will not replace my other boxes it is just much more mobile.
I will take it to the job at hand.

I will add some assembly hints.
Castors make them tight when you install them. Do not tighten any other bolts up completely until completely built then tighten from the top down.
This will work out well if you do it this way.

Elcam84 07-19-18 07:10 PM

I have looked at that one before and its a very nice box. I like the long tool storage allot.

My boxes are the old craftsman boxes and well they are junk and were even when new but back then they were the only game in town other than the tool truck guys. And like you said you need a mortgage for them...

I have been looking at the big husky box as well as the similar sized HF box. I really like they are available in colors other than red. For me red boxes make me think cheap crappy craftsman box.
I have also been looking at the newer craftsman boxes as those arent bad and not red... And there are some fair deals since one of our stores is closing.


I bought one of those long $250ish boxes from Depot with the wood top. Its a handy box for the garage however it isnt as well made as the HF ones. A couple drawers arent quite square etc but it works fine for a box I dont use every day.

pinballlooking 07-23-18 08:55 AM

2 Attachment(s)
Installed my retractable air hose. (It will get a one air hose connector soon)
Added shelf to the tool box and added more socket organizers.
I have two of my magnetic strips mounted with rivets ans washers. I am going to get one more then install those. That door space is very useful space.

https://ecorenovator.org/forum/attac...1&d=1532354022

https://ecorenovator.org/forum/attac...1&d=1532354022


All times are GMT -5. The time now is 08:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger