Solar PV & Heat
Here's a clever approach, where the heat that you are trying to get rid of, has been ingeniously utilized...
ROSE_HOUSE-1 ROSE_HOUSE-2 ROSE_HOUSE-3 -AC |
Pinball, would you mind sending me specifics about those $0.74/watt panels? Secondly, is the space above the panels or between them. The spacing for the Enphase wire connecting panels is at a fixed distance so I can't put too much room between them on sides or the connect spot would not be below panel.
What would you recommend for spacing? I have lots of room on the big shop roof. Thanks - and it is good to be back on reading and such. Steve |
1 Attachment(s)
You can see it in this picture.
They are 4-5” up off the roof and you can walk between them to change out a microinverter. I had to mount them that way so I could bolt the racks into the rafters. I still used the portrait cable it just runs from the bottom to the top. The landscape cable is more money and adds to much voltage drop. http://ecorenovator.org/forum/attach...1&d=1427135441 I sent you a message on the panel prices let me know if you don't get it. |
All times are GMT -5. The time now is 05:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger