Building a Steel Plate roller
1 Attachment(s)
I need a plate roller. Someone sells a set of plans for this one.
They also have a materials list what you need to buy to make it. https://www.etsy.com/listing/8789266..._id=2403653662 I can cut it out with my CNC plasma table. I am going to build a trenching bucket for subcompact tractor and it has a curved back. The back of the bucket is 10 gauge the sides and the rest are 3/8” steel. I could make without a roller but this will make a nicer product and I can use it for other projects. Like fire rings who know what else. This is a picture of one someone else made from the plans. https://ecorenovator.org/forum/attac...1&d=1619464722 |
1 Attachment(s)
I should be able to finish up my plate roller this weekend.
https://ecorenovator.org/forum/attac...1&d=1620405630 |
Very cool. How thick can you roll?
|
It will roll 9 inches of 1/4 inch and wider for thinner material up to 36".
Later I can make fire pits with it. |
1 Attachment(s)
I finished my plate roller. I will get to test it tomorrow.
It is very heavy. https://ecorenovator.org/forum/attac...1&d=1620439787 |
How do you drive the rolls?
|
1 Attachment(s)
Here is a better picture. It is manual with a handle.
https://ecorenovator.org/forum/attac...1&d=1620500956 |
1 Attachment(s)
I rolled some 10 gauge this morning. It was simple and quick.
This will work great for my trenching bucket. https://ecorenovator.org/forum/attac...1&d=1620574425 |
1 Attachment(s)
I made the roller for this job.
The bucket sides are 3/8” plate and the curved part is 10 gauge. https://ecorenovator.org/forum/attac...1&d=1620622666 |
3 Attachment(s)
Here is what the finial product looks like. It will be sandblasted and powder coated black.
I sent a preview to a tractor dealer today and he ordered one. https://ecorenovator.org/forum/attac...1&d=1620767161 https://ecorenovator.org/forum/attac...1&d=1620767161 https://ecorenovator.org/forum/attac...1&d=1620767161 |
All times are GMT -5. The time now is 09:22 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger