Bought a lift table 4’ x 4’
 

I bought a 4’ x 4’ lift table. It will lift 2000 pounds. The arm supports are ¾” steel.
It is hydraulic lift. 600 pounds. I am going to turn it into a welding table.
My back will thank me :)
They sell new $4,000 I picked this on up for $800.
The sell the same one today and still sell parts for it.

I took the board off the top. Do not need to start a fire.

https://ecorenovator.org/forum/attac...1&d=1639850542

next month I will pick up this just the top.
4' x 4' and put this on top of it of the lift table.
It should make fabrication much better.

https://ecorenovator.org/forum/attac...1&d=1639850714

I got this lift table off the pallet and used it some over the weekend.

I love this thing. It is so easy to get what you are welding at a good height.

I used it when I cleaned up my buckets it made that quicker also.

I can’t wait to get the fixture table put on it.

The boards were just double sided taped on they came off pretty quickly.

This table is amazing. I love it and it has really helped my welding because I can get it in a conformable position.

https://ecorenovator.org/forum/attac...1&d=1641580270

The fixture table will take a couple more weeks. It is laser cut and the cutter is moving to a new building and only the top is cut so far. These fixture tops are expensive but I did a labor trade to save money. Need to keep the business profitable.
But I am still using the table most every day.

Such a great add to the shop.