VIDEO: Tip to save water in the shower
|
You're a video master, ben!
Thanks for the post, :) |
Yes, revel in my masterful use of a mirror to get both a wide shot AND a closeup of the timer simultaneously!!!
|
I never would've thought of it!
Plus, it's for a good cause. |
Good idea :)
but at home my wife and I have different schedules so the first shower is taken when the other one is always sleeping... As I'm always late in the morning, I'm as quick as possible under the shower, but I found other ways to save water under the shower :
Last tip : do you really need a shower everyday ? </joking> Denis. |
The simplest solution is a navy shower. It's the way they've showered on Navy ships forever, as fresh water is always a rare commodity on them. The concept is simple. Think about all the water that's wasted while you're soaping and washing your hair and body (or even shaving, as I do). You could avoid all that waste by shutting the water off when you're doing those things. Hell, it actually makes it easier to do your scrubbing.
The challenge in doing it is you have to get the water mix back right again every time you turn the water back on. It's frustrating and wastes time. There's a much simpler solution ... just install a water shutoff valve behind the showerhead. I got mine at either Lowes or Home Depot for around 15 bucks, and installed it in less than 10 minutes with a pair of channel lock pliers and some teflon tape. Step By Step: Install a Water-Saving Shower Shutoff Valve There are a lot of benefits: 1. I cut my water use nearly in half, without having to rush through my showers or cut short my luxuriating under the hot water as I take my time rinsing off. 2. I quit running out of hot water near the end of my showers due to my old, crappy, 30 gallon hot water heater. I'd been planning on upgrading it, but no longer need to. 3. My poorly ventilated bathroom no longer has mold problems, as I wasn't leaving that steaming hot water on for my entire shower any more. This is clearly a win-win, where I can save money and be greener while still enjoying a long, hot shower. I've been doing it for over 6 years, and would never go back. |
I actually HAVE been thinking of installing a Navy shower!
Another problem I have at my house is very high mineral content in the water, which builds up in the showerhead, and makes it hard to clean the shower walls too. I am not happy with the cheapo plastic showerhead I currently have. Since I was thinking about replacing it anyways, I thought I might do a Navy Showerhead. Those are nice and simple chrome. I would be able to pull the whole thing off and drop it in a glass of vinegar every couple months to clean it off! I don't actually imagine using the cut-off valve that much, but if it is there, maybe I will end up using it more than I think! |
What I have is just a valve that installs behind the showerhead, so I can use whatever showerhead I like.
|
Quote:
Quote:
|
All times are GMT -5. The time now is 12:48 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger