1 Attachment(s)
I did not use hardener in my paint. It does not require it, but it takes a while to cure if you do not use it.
I have left it sit outside in the sun to help get the paint to fully cure. I put it on kind of thick and I want it to last. https://ecorenovator.org/forum/attac...1&d=1620235214 |
1 Attachment(s)
Compressor is not done yet but it is closer to where it will live right beside my other compressor.
https://ecorenovator.org/forum/attac...1&d=1623386595 |
1 Attachment(s)
Here it is in the new shop the Emax stayed in the old shop.
This old compressor is running my plasma table grinders... https://youtube.com/shorts/WdCdSzbGjUg https://ecorenovator.org/forum/attac...1&d=1691718096 |
1 Attachment(s)
The oil pressure was low and lower when hot.
I looked up the oil that Quincy recommended you use 30 weight. I bought some Quincy oil. that is 30 weight compressor oil. Now it is very happy I had to lower the oil pressure. Even when hot it has great oil pressure. I will switch to using this oil. This compressor is doing a great job running the shop. https://ecorenovator.org/forum/attac...1&d=1699910880 |
All times are GMT -5. The time now is 02:58 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger