45 deg flares is what I am seeing.
I did not run the mini split last night and today I just took off the line set cover. I inspected all the flare fittings.
The small line at the top had some oil around it. I tightened this fitting some and turned on AC. I did a bubble test. I didn’t not see any bubbles but this line froze up very quickly. Is that normal?
The small line is frosted up on the outside unit also. I checked the other two units and that line is not frosted up at all.
It is putting out about 70 deg air. Do you think it is ok to run it or should I shut it down until the new Freon gets here?
__________________
Current project Aquaponics system , Passive Solar Greenhouse build
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Solar Install 12.5 Kwh-
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Mini Split installs -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
EV Chevy Volt -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
|