EcoRenovator - View Single Post

H16bill · 04-25-17, 09:19 AM

I looked at the Medea units. They have some that will heat down to -22F but the specs seem just a bit different from the Senvilles. The Medea units are marketed a bit differently. More options for IDU (floor, concealed) and no included line set. They don't seem to have the same 36k dual (18k, 24k) that I was considering in the Senville line.

Looking at vacuum gauges. I like the Fieldpiece svg3 but it seems that there are a bunch of defective ones being sold. Looking at the Avg2 that used a mutimeter for the display. I think my DVM has a 200mv scale but I am not sure how accurate this would be. Anyone using this? Any vacuum gauge recommendations?

04-25-17, 09:19 AM	#10
H16bill Lurking Renovator Join Date: Apr 2017 Location: Sodus, NY Posts: 6 Thanks: 0 Thanked 1 Time in 1 Post	I looked at the Medea units. They have some that will heat down to -22F but the specs seem just a bit different from the Senvilles. The Medea units are marketed a bit differently. More options for IDU (floor, concealed) and no included line set. They don't seem to have the same 36k dual (18k, 24k) that I was considering in the Senville line. Looking at vacuum gauges. I like the Fieldpiece svg3 but it seems that there are a bunch of defective ones being sold. Looking at the Avg2 that used a mutimeter for the display. I think my DVM has a 200mv scale but I am not sure how accurate this would be. Anyone using this? Any vacuum gauge recommendations? Last edited by H16bill; 04-28-17 at 07:01 AM..