EcoRenovator  

Go Back   EcoRenovator > Improvements > Conservation
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 04-01-10, 05:15 PM   #1
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default Saving hot water with a Heat Trap? Anti-Thermosyphoning



I've seen a few examples of this idea on the web. The hot water output is looped down (or up then down)
to trap hot water in the water heater and keep it from slowly flowing upwards from the heater to the pipes above it.

I'm thinking of using the double loop version when I do my new mixer install..



http://www.energycodes.gov/moodle/mo...iew.php?id=109


Since it's going to be PEX and not copper, not much cost involved..

What do you guys think? Good idea?

Thanks,
Rich

Xringer is offline   Reply With Quote
Old 04-01-10, 06:05 PM   #2
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Looks good to me.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 04-02-10, 09:58 AM   #3
Piwoslaw
Super Moderator
 
Piwoslaw's Avatar
 
Join Date: May 2009
Location: Warsaw, Poland
Posts: 960
Thanks: 188
Thanked 110 Times in 86 Posts
Default

Is that enough to keep hot water form escaping from the tank? I thought it had to go back down to at least mid-tank before going up again.
Piwoslaw is offline   Reply With Quote
Old 04-02-10, 11:43 AM   #4
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

It seems like the loops don't have to be below the tank..

It looks like the in-&-out lines on this one are from the wall behind the water heater..


My hot water comes from a coil inside of my heating boiler..



the In-&-Out is off the left, top rear of the boiler. So, I can add some heat trap loops
below the I/O and mount the new mixer above the top lid..
Xringer is offline   Reply With Quote
Old 11-12-10, 08:50 AM   #5
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Does anyone have any ideas how how big the trap should be? I'd like to do a quick and easy retrofit on my hot water heater with some PEX line.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 11-12-10, 09:13 AM   #6
Patrick
Apprentice EcoRenovator
 
Join Date: Jul 2010
Location: East Coast of Florida, USA
Posts: 149
Thanks: 2
Thanked 5 Times in 5 Posts
Default

I believe most of the newer heaters already have heat traps built into them (the 1994 model I just removed did). If yours doesn't, you can buy them at HomeDepot: Camco No. 1015 In. Heat Trap Dielectric Nipple - 15132 at The Home Depot
Patrick is offline   Reply With Quote
Old 11-12-10, 09:15 AM   #7
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

From looking at the pictures on the web, I don't think the loops have to be very big.

Energy Savers: Insulate Your Water Heater Tank for Energy Savings

The nice thing about PEX is the price.. So, you can use 6" loops are 18" loops
and the price will be almost the same.
Even with the cost of the extra pipe insulation tossed in..

When I do mine, I'm going to try for about 8" and use the 'feel' test to make sure it's enough.
Xringer is offline   Reply With Quote
Old 11-12-10, 09:17 AM   #8
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Quote:
Originally Posted by Patrick View Post
I believe most of the newer heaters already have heat traps built into them (the 1994 model I just removed did). If yours doesn't, you can buy them at HomeDepot: Camco No. 1015 In. Heat Trap Dielectric Nipple - 15132 at The Home Depot

Interesting. How do those work?
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 11-12-10, 09:18 AM   #9
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Quote:
Originally Posted by Xringer View Post
From looking at the pictures on the web, I don't think the loops have to be very big.

Energy Savers: Insulate Your Water Heater Tank for Energy Savings

The nice thing about PEX is the price.. So, you can use 6" loops are 18" loops
and the price will be almost the same.
Even with the cost of the extra pipe insulation tossed in..

When I do mine, I'm going to try for about 8" and use the 'feel' test to make sure it's enough.
I'd imagine the better your pipe insulation, the larger the loops need to be as the conduction of heat through the water will allow the heat to travel farther 'down'.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 11-12-10, 09:21 AM   #10
Xringer
Lex Parsimoniae
 
Xringer's Avatar
 
Join Date: Feb 2009
Location: Woburn, MA
Posts: 4,918
Thanks: 114
Thanked 250 Times in 230 Posts
Default

Quote:
Originally Posted by Daox View Post
Interesting. How do those work?
From what I've seen, they are just check-valves. One-way flow, so the water
can't back-flow..

Before you install anything, you need to test your input & output pipes to see
if they are indeed warming up.. If they aren't, you can forget this project..

Xringer is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design