EcoRenovator  

Go Back   EcoRenovator > Improvements > Conservation
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 09-15-14, 12:08 PM   #1
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default Vacuum Panel Insulation

Zwerius, from the Neatherlands, is a new member of the EcoRenovator conversation.

He recently started a thread, that pointed to his site in Dutch about his successful efforts to dramatically reduce heat loss through the exterior door to his house.



His original Dutch post SHOULD_NOT_BE_MISSED and is made available in English.

The secret to Zwerius' success is his use of a radical, newly-available insulation called Vacuum Panel Insulation (AKA: "VIP").




I calculated the R-value of the material he was using in Imperial units, and it is R-21.3/inch in US terms.





That makes this stuff a real game changer, which could find use in exterior doors, as Zwerius has done, also for ultra-efficient refrigerators, etc.

I found some US sources of information at TOOLBASE, which gives a very good breakdown of the technology, it's virtues and weak points, primarily vulnerability to puncture.

I also found THIS_SITE, which is a US company that sells VIP panels.

I called the above firm just now and they are forwarding information to me and I will make it available to this thread.

HERE_IS a European article from 2009 that goes into good detail, too.

I did a brief preliminary search for DIY efforts regarding VIP making, and didn't locate anything in the short time I searched... but it sure would be a tremendous boon to be able to do it.

More Info:
  1. HERE
  2. HERE
  3. HERE
  4. HERE
  5. HERE
  6. HERE
  7. HERE
Best,

-AC

__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...

Last edited by AC_Hacker; 09-15-14 at 12:51 PM..
AC_Hacker is offline   Reply With Quote
The Following 3 Users Say Thank You to AC_Hacker For This Useful Post:
Daox (09-16-14), dremd (02-03-17), Zwerius (09-16-14)
Old 09-15-14, 05:12 PM   #2
Mikesolar
Master EcoRenovator
 
Mikesolar's Avatar
 
Join Date: Aug 2012
Location: Toronto
Posts: 958
Thanks: 40
Thanked 158 Times in 150 Posts
Default

Here is a Dow product with an R9.8 value. I am looking for a PDF of a vacuum window I was going to buy for a job but never got to do it.

High-Performance Building Insulation Blanket - Dow Corning
Mikesolar is offline   Reply With Quote
Old 09-15-14, 05:26 PM   #3
Mikesolar
Master EcoRenovator
 
Mikesolar's Avatar
 
Join Date: Aug 2012
Location: Toronto
Posts: 958
Thanks: 40
Thanked 158 Times in 150 Posts
Default

another interesting one.
Attached Thumbnails
Click image for larger version

Name:	VIG pg 14.jpg
Views:	1089
Size:	81.4 KB
ID:	4668  
Attached Files
File Type: pdf VIP.pdf (3.73 MB, 688 views)
Mikesolar is offline   Reply With Quote
The Following User Says Thank You to Mikesolar For This Useful Post:
Zwerius (09-16-14)
Old 09-16-14, 11:05 AM   #4
Daox
Administrator
 
Daox's Avatar
 
Join Date: Aug 2008
Location: Germantown, WI
Posts: 5,525
Thanks: 1,162
Thanked 374 Times in 305 Posts
Default

Very interesting. I thought polyiso was the best insulation we had. I guess its the best readily available one.
__________________
Current project -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
&
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Daox is offline   Reply With Quote
Old 09-16-14, 11:26 AM   #5
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default DIY Vacuum Technology...

In my searching for DIY Vacuum Panel info, I came across the following video that is using vacuum insulation techniques, but in this case, it is for solar heat-loss in water piping:


Some good ideas here

Best,

-AC
__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...
AC_Hacker is offline   Reply With Quote
Old 09-16-14, 12:44 PM   #6
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default More Vacuum Technology Resources...

More Vacuum Technology resources...

Here is a supplier of aluminized Mylar bags

Here is an Instructable for a DIY Vacuum Chamber Sealing Machine.

...and a video of the above machine in operation...



Best,

-AC
__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...
AC_Hacker is offline   Reply With Quote
Old 09-18-14, 01:52 AM   #7
Zwerius
Helper EcoRenovator
 
Zwerius's Avatar
 
Join Date: Aug 2014
Location: The Netherlands
Posts: 70
Thanks: 18
Thanked 26 Times in 14 Posts
Default

Hello Everyone,

From the previous post from AC Hacker, you might get the idea to fabricate your own VIP's.

However, there are a few things you should know.

First of all, you need a quite deep vacuum (<0,1 mbar or < 10Pa) and that's not so easy to achieve with standard vacuum equipment.

Secondly and maybe even more important is, that mylar may be 100% impermeable for Oxygen and Nitrogen (the main components of air), but if you weld mylar parts, the seam is not 100% impermeable. So, slowly oxygen and nitrogen will leak in and reduce the vacuum. For this reason getter materials are incorporated in the inside of the closed "bag", to cath the atoms that leaked in.

Another difficulty might be to get the insulation material that should be inside the bag. It needs to have very small pores. Generally fumed silica is being used.

I would say, this all is beyond the capabilities of DIY. But of course you may want to try . If so, keep us posted...

If you want to read all the details about VIP's, I would suggest you to read these reports that I used during my study Renewable Energy Systems Technology (Loughborough University UK):
http://www.ecbcs.org/docs/Ann39_2001_1_hipti_proc%20.pdf https://www.google.nl/url?sa=t&rct=j...75097201,d.ZWU
http://www.ecbcs.org/docs/Annex_39_R...ubtask-A-B.pdf

Despite the difficulties to fabricate this stuff it's very interesting, but expensive material.

For those of you interested in advanced glazing and transparent insulation, I would recommend this link: https://www.google.nl/url?sa=t&rct=j...75097201,d.ZWU
Zwerius is offline   Reply With Quote
The Following 3 Users Say Thank You to Zwerius For This Useful Post:
AC_Hacker (09-18-14), Daox (09-18-14), Mobile Master Tech (03-04-16)
Old 09-18-14, 08:26 AM   #8
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
Default

That's a vacuum level of about 75 microns, which is attainable with a good HVAC vacuum pump in good condition.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Old 09-18-14, 10:13 AM   #9
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default

Quote:
Originally Posted by Zwerius View Post
...First of all, you need a quite deep vacuum (<0,1 mbar or < 10Pa) and that's not so easy to achieve with standard vacuum equipment...
I would be interested in discussing this idea...

Zwerius, do you think that the phenomenon of vacuum insulation only occurs at <0.1 mbar? This would be what is known as a 'step function'.

It seems to me that there would be a gradient of insulation improvement as vacuum levels became greater.

For instance, a micron gauge is an instrument that is commonly used in refrigeration work to measure vacuum levels. The principle of operation is that there is a direct relationship between variation of heat flow across a variation of vacuum level. The micron gauge uses a very small heat source and a precision thermocouple is used to measure the changing heat flow as vacuum levels change.


As another example, taken from Aerogel technology, is a graph taken from THIS_PAGE that illustrates this varying relationship.



My point is that a person who is working with relatively unsophisticated equipment actually can realize very useful improvements in insulation, even if they do not achieve the theoretical maximum.

In short, yes I do believe that it is possible to DIY your own useful vacuum insulation.

Best,

-AC
__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...

Last edited by AC_Hacker; 09-18-14 at 10:23 AM..
AC_Hacker is offline   Reply With Quote
Old 09-18-14, 10:20 AM   #10
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default

Please Remove Duplicate

__________________
I'm not an HVAC technician. In fact, I'm barely even a hacker...
AC_Hacker is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:34 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design