EcoRenovator  

Go Back   EcoRenovator > Improvements > Conservation
Advanced Search
 


Blog 60+ Home Energy Saving Tips Recent Posts Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Display Modes
Old 06-17-10, 01:17 AM   #1
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default CHP = Combined Heating & Power...


A few years ago, a good friend of mine who worked for the Oregon Dept of Energy took a trip to Freiburg, Germany, so see some of the innovative things going on there.

One of the most interesting ideas he saw was an apartment building which was very well insulated, and which derived all of it's heating and electrical power from a Ford V-8 in the basement, probably running on Natural Gas. I didn't know it at the time but what he was describing was a CHP (Combined Heating & Power) setup (AKA: CoGeneration).

Unfortunately I don't have a photo of it. However, the engine is hooked to a generator, and the heat from the cooling water and from the exhaust (normally thought of as 'wasted energy') is used for building heat.

In fact the setup was designed so that when the Ford V-8 was running harder in the chilly German evenings, the extra electrical power generated by the CHP was sold back to the power companies.

Here is a report of CHP activities going on in Mississippi, with photos:

http://www.propane.tx.gov/research/d...CHPSystems.pdf

Here's a picture from it:


Looks to me that if a small unit CHP unit were combined with a heat pump, it would be very efficient, indeed.

A water-cooled generator would be quieter and last longer, and the heated water would be easier to handle and store... could even run it through a hydronic floor heat system.

The trick is to find a small, sturdy water cooled engine...


Here's a link to a very interesting small engine, water-cooled, propane/natural gas powered generator that is designed for heavy use.

And here's a monster link for further inquiry.

And I did find conversion kits to change over small generator engines to Propane & Natural Gas

Here

And Here

But, locating a small, sturdy engine that's water-cooled, hmmm.....

As further food for thought, a Ton of AC = 12,000 BTU/hr = 4.715 hp

Regards,

-AC_Hacker

Attached Thumbnails
Click image for larger version

Name:	CHP.jpg
Views:	16636
Size:	47.0 KB
ID:	800   Click image for larger version

Name:	friberg.jpg
Views:	6312
Size:	95.0 KB
ID:	801  

Last edited by AC_Hacker; 06-17-10 at 01:35 AM..
AC_Hacker is offline   Reply With Quote
Old 06-18-10, 02:37 PM   #2
Piwoslaw
Super Moderator
 
Piwoslaw's Avatar
 
Join Date: May 2009
Location: Warsaw, Poland
Posts: 960
Thanks: 188
Thanked 110 Times in 86 Posts
Default

Subscribed!!
Piwoslaw is offline   Reply With Quote
Old 06-21-10, 07:22 PM   #3
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
Default

Connect a small car engine to an industrial electric motor, then add heat exchangers to recover as much heat as you can. If you spin an induction motor above synchronous speed, it becomes a generator.
__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Old 06-21-10, 08:34 PM   #4
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default Further

Quote:
Originally Posted by NiHaoMike View Post
Connect a small car engine to an industrial electric motor, then add heat exchangers to recover as much heat as you can. If you spin an induction motor above synchronous speed, it becomes a generator.
Good start, now carry it further...

If you were to estimate the gallons used per hour of your hypothetical setup(imagine small car mileage) then convert it to BTUs you might have a useful idea of the total heat & electrical power output. Figure maybe 10% to 15% efficiency for the electricity generated and 85% to 90% efficiency for the heat portion.

Or, just use power bills to know the amount of power you and your co-consumer use per day, and figure backwards to the fuel rate and engine size required.

See? Then it starts to get interesting...

-AC_Hacker

PS: As for myself, I'm thinking along the line of an older, small, 2 cyl, low rpm marine engine.
AC_Hacker is offline   Reply With Quote
Old 07-02-10, 04:44 AM   #5
Piwoslaw
Super Moderator
 
Piwoslaw's Avatar
 
Join Date: May 2009
Location: Warsaw, Poland
Posts: 960
Thanks: 188
Thanked 110 Times in 86 Posts
Default

People already make DIY home-scale cogeneration projects with an old IC engine running on anything from veggie oil to gassified wood. But the problem with an IC engine is that, well, it's internal combustion. This means that
  • It's complicated,
  • There is a lot of stress on the parts,
  • The fuel must be very clean so nothing deposits inside the engine.

Using a stirling engine is much simpler and allows the combustion to happen externally. There is a discussion on exhaust heat recovery using steam power over at EcoModder.com, which has steered towards stirling engines.

I found a natural gas fired prototype home cogeneration unit:
De Dietrich Remeha – Das Unternehmen
Google translation from German
Kocioł 2w1 - ogrzewanie i równoczesne wytwarzanie prądu
Google translation from Polish



This is a nat gas condensing furnace (107% efficiency) with a stirling engine running a 1kW generator. Producing 1kW of electricity also produces 5kW of heat energy, with the option for more heat if needed. It was supposed to be on sale here in 2010, for about 15,000 €, but I haven't found it anywhere.

Last edited by Piwoslaw; 07-02-10 at 04:47 AM..
Piwoslaw is offline   Reply With Quote
Old 07-07-10, 10:12 PM   #6
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default Co-gen = Slow-gen

Quote:
Originally Posted by Piwoslaw View Post
People already make DIY home-scale cogeneration projects...

I found a natural gas fired prototype home cogeneration unit...

This is a nat gas condensing furnace (107% efficiency) with a stirling engine running a 1kW generator. Producing 1kW of electricity also produces 5kW of heat energy, with the option for more heat if needed.
This is great info.

I searched but could not find anything that was not industrial size for sale.


This kind of thing may show up in Europe sooner than in the US (we're too busy dropping bombs to develop efficient home heating).

Let us know if anything turns up.

-AC_Hacker
Attached Thumbnails
Click image for larger version

Name:	cogen.jpg
Views:	6660
Size:	18.9 KB
ID:	843  
AC_Hacker is offline   Reply With Quote
Old 07-09-10, 01:04 PM   #7
hamsterpower
Apprentice EcoRenovator
 
Join Date: Oct 2009
Posts: 142
Thanks: 0
Thanked 11 Times in 11 Posts
Default freewatt

This has been available in the northeast US for a few years now.
Freewatt Eco-Friendly Heating & Power Systems

Based on a small Honda CNG engine sounds like a good idea, just too expensive for me.
hamsterpower is offline   Reply With Quote
Old 07-11-10, 08:06 PM   #8
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default

Quote:
Originally Posted by hamsterpower View Post
This has been available in the northeast US for a few years now.
Freewatt Eco-Friendly Heating & Power Systems

Based on a small Honda CNG engine sounds like a good idea, just too expensive for me.
Looks like they are for sale, but not anything in my neck of the woods.


But here's a PDF of the Honda Micro CNG...

The PDF says it's a 163 cc vertical shaft water-cooled engine. That should give us some inkling of an engine size for a tiny Co-Gen.


And here's an Ebay link for natural gas & propane carb from 1.5 HP and above.

Now we need to find a very small, highly reliable water cooled engine, and some kind of dynamo. Looks like the design of the exhaust gas heat recuperator is also pretty sophisticated, since it scavanges not only the sensible heat but also the latent heat of vaporization (condensing heat recovery).

-AC_Hacker
Attached Thumbnails
Click image for larger version

Name:	NG-carb.jpg
Views:	5861
Size:	3.9 KB
ID:	851  
AC_Hacker is offline   Reply With Quote
Old 07-15-10, 12:25 AM   #9
AC_Hacker
Supreme EcoRenovator
 
AC_Hacker's Avatar
 
Join Date: Mar 2009
Location: Portland, OR
Posts: 4,004
Thanks: 303
Thanked 723 Times in 534 Posts
Default 46.5cc water-coled engine...

I did come across a very small water-cooled engine:


And here are the specs:
46.5cc,2-stroke,water-cooled,pull-start gasoline Engine

Specifications:
1) Engine type: single-cylinder, 2-stroke, water-cooled
2) Piston displacement: 46.5cc
3) Bore x stroke: 39.5 x 37 mm
4) Max. torque: 5.8N.m/12,000rpm
5) Max. power: 6.0KW/11,000rpm
6) Min. idle rotate speed: 3,500rpm
7) Compression ratio: 9.0:1
8) Ignition: CDI
9) Spark plug: Torch
10) Carburetor: diaphragm
11) Air filter: polyurethane foam
12) Start mode: pull-start
13) Clutch style: adjustable centrifugal automatic
14) Average fuel consumption: 610g/kWh
15) Dimensions: 400x210x230 mm
16) N.W.: 5.5kg
So if the max power is 6 KW, then it might be reasonable to expect about half of that (3 KW) on a long term basis.


If the unit was mated to a pancake generator similiar to one that the Honda CNG uses, the generator would also function as a starter motor. My hybrid car has a similar generator built into the flywheel, that functions like a starter, and it works better than any starter I have experienced.

So if the electrical generation was around 15% efficient (not unreasonable), we could get about 450 Watts of power. And if we could capture 60% of the 'wasted' heat energy, we would have 1530 watts of heat energy or 5220.36 BTUs.

Those energy levels would be in excess of my non-peak home energy consumption, which means I could sell energy back to the power company.

Not bad for a 46cc engine.

-AC_Hacker
Attached Thumbnails
Click image for larger version

Name:	45.5cc water coled engine.jpg
Views:	8399
Size:	14.6 KB
ID:	856   Click image for larger version

Name:	small-engine generator.gif
Views:	7581
Size:	22.7 KB
ID:	857  

Last edited by AC_Hacker; 07-15-10 at 12:35 AM..
AC_Hacker is offline   Reply With Quote
Old 07-15-10, 08:53 PM   #10
NiHaoMike
Supreme EcoRenovator
 
NiHaoMike's Avatar
 
Join Date: Oct 2008
Location: Austin, TX
Posts: 1,154
Thanks: 14
Thanked 257 Times in 241 Posts
Default

I think 2 strokes are less efficient than 4 strokes.

__________________
To my surprise, shortly after Naomi Wu gave me a bit of fame for making good use of solar power, Allie Moore got really jealous of her...
NiHaoMike is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Ad Management by RedTyger
Inactive Reminders By Icora Web Design