EcoRenovator - View Single Post - I repaired my Insteon Serial Modem Interface.

pinballlooking · 03-14-17, 09:22 PM

This is how my home automation talks to my house lighting. The power supply goes bad in them.
So I bought about $2 in parts and fixed it as other before me have. I used better caps they are higher temp. They think the get to hot and go bad. Sure saves paying 80 + shipping for a new one.
Here is the post.
Repair of 2413S PLM When the Power Supply Fails - Smarthome Channel - Universal Devices Forum

This setup runs my hot water recirculation pump. When you turn on a light close to water. Like a bathroom light it will run the pump for a certain amount of time. So when you get to the sink it is warm.
This was bad for a day before I fixed it man you don’t realize how much you like this feature until it is gone for a day.
I am very glad it is back.

03-14-17, 09:22 PM	#1
pinballlooking Super Moderator Join Date: Jun 2013 Location: SC Posts: 2,923 Thanks: 172 Thanked 564 Times in 463 Posts	I repaired my Insteon Serial Modem Interface. This is how my home automation talks to my house lighting. The power supply goes bad in them. So I bought about $2 in parts and fixed it as other before me have. I used better caps they are higher temp. They think the get to hot and go bad. Sure saves paying 80 + shipping for a new one. Here is the post. Repair of 2413S PLM When the Power Supply Fails - Smarthome Channel - Universal Devices Forum This setup runs my hot water recirculation pump. When you turn on a light close to water. Like a bathroom light it will run the pump for a certain amount of time. So when you get to the sink it is warm. This was bad for a day before I fixed it man you don’t realize how much you like this feature until it is gone for a day. I am very glad it is back. Attached Images __________________ Current project Aquaponics system , Passive Solar Greenhouse build To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Solar Install 12.5 Kwh- To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. Mini Split installs - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. EV Chevy Volt - To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.