EcoRenovator - View Single Post - I done a bad thing: need advice diagnosing shorted PV panel (output = half voltage)

MetroMPG · 04-11-09, 11:24 PM

Maybe... except for my 0 volt situation. My understanding of the discussion you linked is that it's OK to omit a blocking diode provided a charge controller is used, and bypass diodes are optional.

I'll have to play around with it some more tomorrow. If I spend the time to actually trace & map the wiring in the entire panel, I should be able to figure it out.

But what happened when I soldered that burnt connection is a mystery - I'm confused as to why it didn't solve the problem.

04-11-09, 11:24 PM	#4 (permalink)
MetroMPG Infrequent noob Join Date: Aug 2008 Posts: 143 Thanks: 0 Thanked 0 Times in 0 Posts	Maybe... except for my 0 volt situation. My understanding of the discussion you linked is that it's OK to omit a blocking diode provided a charge controller is used, and bypass diodes are optional. I'll have to play around with it some more tomorrow. If I spend the time to actually trace & map the wiring in the entire panel, I should be able to figure it out. But what happened when I soldered that burnt connection is a mystery - I'm confused as to why it didn't solve the problem. __________________ . To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.